Attic Insulation in Richmond Hill, Ontario
Blown-in and batt insulation topped up to the R-60 recommended for Ontario homes, with the air sealing and ventilation work that makes it actually perform.
The local picture
We are based at 10666 Bayview Ave, so Richmond Hill attics are the ones we see most — from the older homes around Mill Pond to the newer builds in Jefferson and Oak Ridges. Being local usually means a faster assessment slot and a same-week install.
Older central streets, newer developments in Jefferson and Oak Ridges
Service details
How the job runs
Attic inspection
Depth measured, ventilation checked, moisture and pest damage noted.
Air sealing first
Top plates, pot lights and penetrations sealed — insulation alone does not stop air movement.
Ventilation protected
Baffles installed so soffit vents keep working after the top-up.
Insulation installed
Blown to the specified depth, with depth markers left in place for verification.
What we see in these homes
- Older central homes with shallow, settled attic insulation
- Homes near the Oak Ridges Moraine exposed to strong winter wind
- Walkout basements losing heat through the exposed wall
Typical ranges
What attic insulation typically costs in the GTA, what moves the number up or down, and what our own quote includes. These are market ranges for orientation — your price comes from the inspection, not from this page.
Attic Insulation Cost in Toronto & the GTAQuestions about this service
How much insulation should my attic have?
R-60 is the current recommendation for this climate zone. Many GTA homes built before the 2000s sit well below that.
Do I need to remove what's there?
Not always. If the existing material is dry, clean and pest-free, a top-up is often the better value.
Will this help in the summer too?
Yes. The same layer that keeps heat in during winter keeps attic heat out of your rooms in July.